Porcelain & Quarry is continued from previous page.
S P R I NG 2015
I MAGINE WHAT'S POSSIBLE
Grout Joint Recommendation
1/8" (3/16" when rectangular size is
installed in a staggered brick-joint
pattern; overlap should not exceed 33%)
Sq. Ft. Per
6 x 24 Field Tile
(5-3/4" x 23-7/16")
(14.62 cm x 59.44 cm)
6 x 24
Floor bullnose trim is intended to coordinate with floor field tile in the standard
90-degree installation position.
Photo features Topsail 6 x 24 field tile in a staggered pattern on the floor.
> 275 lbs
See page 500 for additional information on Test Results and Classifications.
See "Factors to Consider" and "Important Product Warranty Information" on pages
Tile Texture or
Dry & Level - Interior
Wet & Level - Interior
Commercial Dining Areas -
Pool Decking & other wet
areas with minimal footwear
0.55 Required if tile size is > 3 x 3
0.60 Required if tile size is > 3 x 3
Interior Ramps, Inclines and
0.65 Required if tile size is > 6 x 6
Floor tile suitable for exterior applications in freezing and non-freezing climates when
proper installation methods are followed.
A DCOF value of 0.42 is the new standard for tiles specified for commercial application
in standard A137.1-2012, Section 9.6. It replaces the SCOF value of 0.60 referenced in
ASTM C1028. For more information on the correlation between the two values and about
the DCOF AcuTest, visit www.daltile.com/dcof.
Walls / Backsplashes
Previous Page - Next Page
-2015 Spring Product Catalog
Choose a different catalog.
Virtual Catalogs | Daltile